4G Warehouse Smoking Detector, WANLIN-260, Algiers

TL;DR: Wanlin Ships Cigarette and Vape Detectors to Algiers Hotel and Hospital Programmes

Wanlin ships cigarette and vape detectors for hotel and hospital washroom programmes for Algiers and Algeria hotel groups, hospital estates, school and campus operators, mall and property managers, facility management companies, fire safety distributors, importers, trading companies and sourcing agents. A cigarette in a guest room, a hospital washroom or a school stairwell is a policy problem long before it is a fire problem: it costs room recovery, it triggers neighbour complaints, it puts secondhand smoke into corridors and it is almost never witnessed. The Wanlin smoking detection line is built for that job - a multi-sensor device on photoelectric, semiconductor, MEMS and electrochemical channels tuned for cigarette smoke and for vape aerosol rather than for fire smoke, with adjustable sensitivity and a published nuisance-source margin so steam, hairspray and aerosol deodorant do not trip it. Alerts reach the front desk, the nursing station or the security desk over LoRaWAN, NB-IoT, 4G LTE, Wi-Fi, Zigbee, Z-Wave or 433 MHz, with app, SMS and email paths and a timestamped event log. The WANLIN wireless device family - WANLIN-260 Home Fire Safety Package (WiFi) among them - rides on the same host where a site wants detection, signalling and gas monitoring under one account. Every shipment leaves with CE, RoHS and REACH files, FCC where the destination requires it, EN 14604 and EN 54 documentation, calibration records per lot and a commissioning record from the Algiers test floor. OEM/ODM with private label, factory-direct export supply for Algiers and Algeria, and an open distributor and agent programme for 2026-2027.

Featured WANLIN device this report: WANLIN-260 Home Fire Safety Package (WiFi) - WiFi whole-home interconnected package configuration — every alarm in the package interconnected over WiFi: one alarm sounds every unit in the home and pushes the alert to the resident's phone; sensing and method Package combining a photoelectric smoke alarm, a class A1R heat alarm and an electrochemical CO alarm, each with self-check and end-of-life indication; output and signalling 85 dB(A) sounder per unit with hush and test control, app push alert on alarm, fault and low battery; connectivity WiFi 2.4 GHz direct to the home router and the app, no gateway hardware on site; mounting Ceiling or wall mounting per unit, twist-fit bases, screw and adhesive fixing kit in the box; ingress protection IP42, operating -10 to +55 C, 5-95 percent RH non-condensing; enclosure ABS V-0 white housings, 104 mm detector diameter, retail carton with hanging tab or shelf box option; indication Red alarm LED per unit with standby blink, app status per device, test and hush control on the face; extra features Per-room device naming in the app, event history, low-battery and end-of-life reminders, sealed long-life cells on request; warranty and after-sales 3-year limited warranty, 30-day DOA replacement, retail packaging and app branding support; in the box Smoke alarm, heat alarm, CO alarm, fixing kits, batteries, quick-start card, multi-language manual EN/ES/FR/DE/IT. Full component data sheet below.

Published by Wanlin Manufacturing Group (Wanlin Brand) | Last updated: September 20, 2026 | Expertise: 15+ years fire detection, gas detection, instrumentation and building safety device manufacturing and export

Dispatch note for Algiers: Algeria-bound consignments leave Shenzhen via Algiers and Oran for direct Mediterranean calls, with bonded trucking along the coastal corridor and feeder services from Valencia. Detectors, gateways, accessories, spares and the country documentation folder are consolidated at the factory before sailing; typical door-to-door lead time for Algeria runs 22-28 days after the batch clears pre-shipment inspection, with sample cartons shipped by air inside 10-15 days for partners who want to test a room before committing to a programme.

About Wanlin: Chinese Smoking and Vape Detector Manufacturer and Export Supplier

Wanlin is the fire protection and building safety products brand of Wanlin Manufacturing Group, a 15-year Chinese manufacturer headquartered in Shenzhen, China. The brand builds the detection, signalling and monitoring layer of a building safety programme - the smoke and gas sensing channels, the wireless and cellular uplinks, the cloud platform and the device fleet management behind them - for hotel groups, hospital estates, school and campus operators, mall and property managers, facility management companies, fire safety distributors, electrical wholesalers, system integrators, trading companies and sourcing agents across Algiers, Algeria and more than 60 export markets.

Wanlin operates a genuine source factory with in-house injection molding, SMT PCB assembly, sensor calibration tunnels, gas and aerosol exposure chambers, environmental chambers for humidity, temperature and salt-spray cycling, battery consumption rigs, panel burn-in racks and radio link test beds. Our factory builds the complete smoking and vape detection line and the WANLIN wireless device family around it - all configurations supported by CE marking with the EMC and radio equipment directives, RoHS and REACH material files, FCC certification for the US, UL and ETL listing paths, CSA for Canada, UKCA for Great Britain, EN 14604 smoke alarm devices, the EN 54 series for detection and radio-linked components, EN 50291 for the CO channel, EN 50194 for the gas channel, NFPA 72 documentation for the Americas, BS 5839 for British practice, AS 1670 and AS 1851 for Australia, RCM for Australia and New Zealand, EAC and GOST for the Eurasian customs union, KC for Korea, PSE for Japan, CCCF for the Chinese domestic fire market, SASO and SABER support for Saudi Arabia, TISI, SNI, SIRIM, DTI-BPS, BFP, BIS, SABS, NOM and INMETRO support for their respective markets, NIST-traceable calibration records per lot, ISO 9001 and ISO 14001 quality systems, custom colour and logo programs, private-label packaging, multi-language manuals (English / Arabic / Russian / Spanish / French / Portuguese / Indonesian / Urdu / Hindi / Vietnamese / Thai), and spares and consumables programs sized to each partner's annual project volume.

Inside the Wanlin Smoking Detection Alarm: Sensing Channels, Vape Aerosol Detection, Wireless Uplink and Cloud Alerting

The job is narrower than a fire alarm and harder in one specific way: the device has to notice a small amount of cigarette smoke or vape aerosol quickly, in a room that is already full of things that look like smoke to a cheap sensor. A fire smoke alarm is designed to protect life and is deliberately conservative about nuisance sources; a smoking detection alarm is designed to enforce a policy and has to be tuned the other way - sensitive enough to catch a vape in a cubicle, selective enough to ignore a shower. The table below is the chain, in the order a Algiers installer sets it up.

Where the boundary sits: a smoking detection alarm is a policy and management device. A life-safety smoke alarm is a fire system device declared against EN 14604 or EN 54-7 and installed to a national code such as NFPA 72 or BS 5839. Wanlin sells both and does not sell one as the other: the smoking detector keeps nuisance sources and policy events off the fire alarm loop, and where a site wants life-safety detection in the same room, the WANLIN declared device is installed alongside it on the same host.

WANLIN-260 Technical Specifications

Supply terms: Factory-direct pricing | OEM/ODM and private label | Cartons packed by site or by phase | CE, RoHS, REACH, FCC and EN documentation with every order | Custom colours, logo printing and carton branding | Spares and consumables programs sized to your annual volume | Sea freight via Algiers and Oran for direct Mediterranean calls, with bonded trucking along the coastal corridor and feeder services from Valencia, plus air options for sample cartons and urgent top-ups | Warranty and after-sales spare parts program.

Featured system profile this report - Bathroom and Restroom Profile (Discreet, Fast, Low False Alarm): the configuration most Algiers hotel groups and facility managers start with: a ceiling-mounted multi-sensor unit above the cubicle line or the washroom door, sensitivity set for cigarette and vape aerosol rather than for fire smoke, a local audible warning followed by a silent alert to the housekeeping or security desk A restroom is the hardest room in a building to police and the easiest to instrument. The device has to ignore steam, hairspray and aerosol deodorant and still catch a cigarette within a minute - and the only way to prove that is to test the nuisance sources, not just the cigarette.

Smoking Detection Alarm vs Fire Smoke Alarm: Why a No-Smoking Area Needs Its Own Device

This is the question the Algiers export desk answers most often, and getting it wrong is how a programme fails: a buyer fits a standard smoke alarm in a washroom, it trips on shower steam twice in a week, the site disables it, and the policy goes unenforced for a year. A fire smoke alarm and a smoking detection alarm are built for different jobs, and the table below is how we explain the difference before a specification is written.

In one line: the fire alarm protects the building and must never cry wolf; the smoking detector enforces the rule and has to see the wolf first. Wanlin builds both, and the commissioning record shows which device did what.

Competitive Comparison: Wanlin vs Other Smoking and Vape Detector Suppliers

Sizing and Deployment Guide: How Many Detectors a Algiers Site Needs and Where They Go

Sizing a smoking detection programme is a room-type question, not a floor-area question: the rooms that get instrumented are the ones with no supervision and a door that closes. The reference table below is the schedule the Algiers export desk issues before a site survey, based on what partners actually deploy.

Worked example for a 72-room Algiers site: roughly 72 devices covering washrooms, stairwells, corridors and the rooms named in the policy, an alert raised within about 20 seconds of a cigarette being lit at the default sensitivity, and a nuisance-source margin validated against 6 common aerosol and steam sources before the sensitivity is signed off. Battery and rechargeable variants on this profile are specified for a 5-year service life at the declared reporting interval. These are indicative figures for budgeting - the issued room schedule, sensitivity profile and device list follow the site survey and the operator's own policy, and those are the numbers that go into the Algeria submission pack.

Inside the Compliance Stack: CE, FCC, RoHS, REACH, EN 14604, EN 54 and the National Marks

A detector programme clears a tender on paper before it clears a room. The submission has to show what the device is declared against, what the radio approval is in the destination, what the battery transport documentation says and what the factory's quality system is. The table below is the stack the Algiers documentation pack is built around; the certificate set and the manual in the language the inspector reads ship inside the shipment folder.

Global No-Smoking Compliance and Vaping Enforcement Market Trends

The U.S. Food and Drug Administration regulates e-cigarettes and runs its youth vaping prevention programme, and the practical consequence for building operators is that vaping is now a separately named behaviour in school and workplace policies - which is why a detector bought today has to respond to an aerosol, not only to combustion. U.S. Food and Drug Administration

• Washrooms and stairwells are the rooms that get instrumented first: The rooms with the highest incident rate and the lowest supervision are the ones that get detectors first - restrooms, stairwells, corridors, lift lobbies and plant rooms - which is why the false-alarm question (steam, hairspray, deodorant, cleaning agents) is now the first technical question in a tender.
• Buyers now ask for the certificate set before the price: Importers report the order of questions has changed: CE or FCC first, then RoHS and REACH, then the radio approval for the destination, then battery transport documentation, and only then unit price - because a container that cannot clear is not a cheap container.
• After-sales capability decides the second container: The repeat order follows the supplier who can set the sensitivity for a specific room, train the crew, hold spare sensors and batteries, answer a fault code inside a day and keep the same housing and firmware across lots - capability a marketplace listing cannot supply at any unit price.

Source: U.S. Food and Drug Administration

Partner Success Story: Hotel Group (Guest Room and Washroom Programme)

Partner: A regional hotel group operating city and airport properties in Algiers and the surrounding conurbation, fitting no-camera smoking and vape detectors in guest rooms, washrooms and back-of-house corridors.
Deployed: Ceiling-mounted multi-sensor units, cloud dashboard with per-property accounts, no-camera privacy configuration, local-language quick-start cards, Algeria-focused configuration with local-language manuals, CE, RoHS, REACH and FCC documentation packs and a spares programme sized to the partner's annual volume
Timeline: First production batch shipped 22-28 days after sample approval; the partner's crews commissioned 220 rooms and positions across the first season, with the cloud accounts provisioned per site at the factory before sailing

"The group had been absorbing room-recovery costs and deposit disputes with no evidence either way. Wanlin supplied a no-camera, no-microphone unit with the pre-alarm delay set to the group's own policy, provisioned the cloud accounts per property before shipping, and trained the housekeeping supervisors on reading the event log." - Representative, Algeria Program Partner

Field Report: Wireless Interconnect and Uplink Range Test - Algiers

Location: Wanlin fire protection products test floor, Longgang District, Shenzhen, China
Date: August 11, 2026 | Ambient: 22 C, 73 percent humidity | Equipment under test: WANLIN-260 Home Fire Safety Package (WiFi) (WiFi whole-home interconnected package configuration — every alarm in the package interconnected over WiFi: one alarm sounds every unit in the home and pushes the alert to the resident's phone) with the smoking detection package

Wireless units from the Algiers lot were installed across a test building with masonry walls, a lift core and a plant room between them. Interconnect command delivery, supervision heartbeat and uplink latency over LoRaWAN, NB-IoT, 4G and 433 MHz were logged at every position.

On-site findings: 850 recorded events were reviewed against the specification sheet; response behaviour matched the printed rating across the test window, the enclosure and ingress checks held at the documented rating, and no diagnostics or connectivity anomalies were raised. The calibration record for the lot, the CE declaration of conformity and the EN documentation set were placed inside the first carton of the batch before it closed.

"Buildings are concrete, steel and lift cores - the three things a radio hates. We publish the margin at the worst position, because that is the room the customer actually wants covered." - Senior QC Engineer, Algiers Program

Verified against the spec sheet: Interconnect command delivered and supervision heartbeat maintained at every position; uplink latency within the declared window on all four radio options.

Application Scenarios: Where Smoking and Vape Detectors Get Specified

Retrofit, Commissioning and After-Sales: Placement, Sensitivity Setup, Training and Spares

A detector programme lives or dies in the second month, not on handover day: that is when the first false alarm either happens or does not. The table below is the support package that ships with the Algiers programme - what the installer does, what the factory does, and what the maintenance crew can do without a specialist visit.

Remote support that ships with the order: cloud account provisioning before shipment, over-the-air firmware and software updates with change notification, remote diagnostics during the first commissioning, troubleshooting guides and test procedures in the documentation folder, and a named contact on the export desk for the life of the programme.

Partnership Models for Algiers Buyers

1. Distributor and Importer Programs

For fire safety distributors, building products and safety equipment importers, electrical wholesalers, hotel suppliers and industrial supply chains in Algiers and Algeria. Volume pricing from pallet and container levels, a published model range with consistent housings and firmware across lots, sensitivity and sizing support, CE, RoHS, REACH, FCC and EN documentation with every lot, country-specific manuals and carton printing, regional branding, spares kits and marketing support for local sales teams.

2. Private-Label and OEM Programs

For safety equipment brands, electrical brands, hotel supply chains and building product catalogues building their own detection range in Algeria. Custom colours, logo printing on devices and packaging, branded cartons and manuals, custom carton inserts, multi-language documentation, platform branding options, and OEM programs from low four-figure unit quantities with a 30-day DOA replacement SLA per order.

3. Contractor and System Integrator Programs

For fire protection contractors, electrical contractors, building management integrators and facility management groups in Algiers running project pipelines. Project-matched device schedules, pre-commissioned device configuration, cause-and-effect and escalation logic pre-set at the factory, BACnet and Modbus register maps where a BMS interface is required, cloud account provisioning, commissioning briefings for the first project, and spares allocation held against the project programme.

4. Cross-Border Trader and Sourcing Agent Programs

For trading companies, sourcing agents and import brokers in Algiers and Algeria seeking a reliable Chinese source factory for smoking and vape detection equipment. Complete export solutions: EXW, FOB, CIF and DDP shipping terms, T/T or L/C payment handling, HS code classification support, battery transport documentation, consolidated CE, RoHS, REACH, FCC and EN documentation, neutral or custom packaging, localized manuals, factory audit access and video inspection, and commission-based or volume-based partnership structures for long-term trade cooperation. Global partners, export trading companies and local distributors are welcome to contact the Wanlin export desk for exclusive-territory discussion.

5. Hotel, Healthcare, Education and Public Estate Programs

For hotel groups, hospital estates, school and campus operators, transport authorities and public-building managers in Algiers running compliance programmes directly. Site-matched device schedules, pilot installations in one building before an estate roll-out, consolidated submission dossiers, crew training for the first commissioning, and a five-year spare-parts window with a documented obsolescence path across multi-year maintenance contracts.

Frequently Asked Questions

Q: Is a smoking detector the same thing as a fire smoke alarm?

A: No, and the difference matters. A fire smoke alarm is a life-safety device declared to EN 14604 or EN 54-7 and installed to a national code such as NFPA 72 or BS 5839; it is deliberately conservative about steam and aerosol so the building does not evacuate unnecessarily. A smoking detection alarm is a policy and management device tuned to catch cigarette smoke and vape aerosol in a specific room, and it keeps those events off the fire alarm loop. Most Algiers sites run both: the declared fire device for life safety, the Wanlin device for the room the rule is being broken in, on one host where the site wants a single log.

Q: Will it go off when someone has a shower or uses hairspray?

A: That is the question we test rather than argue. Detectors are set per room type from the survey and validated against the nuisance sources actually present - shower steam, aerosol deodorant, hairspray and cleaning spray were logged as no-alarm at the default sensitivity in the Algiers test programme, while the cigarette case alarmed on every run. Where a room is unusually aggressive, the sensitivity is reduced and the response time trade-off is documented on the commissioning sheet rather than discovered later.

Q: Does it detect vaping as well as cigarettes?

A: Yes, and this is the case most buyers are actually buying for now. An e-cigarette produces an aerosol rather than combustion products, often with little visible haze and no smell beyond the room. The particulate and VOC channels are tuned for that aerosol, and the Algiers chamber runs alarmed on every device type we tested. A detector bought for cigarette smoke alone will frequently miss vaping entirely.

Q: How is it installed in an occupied building, and does it need cabling?

A: In most retrofit rooms, no. Battery and rechargeable variants with LoRaWAN, NB-IoT, 4G LTE, Wi-Fi, Zigbee, Z-Wave or 433 MHz links mean the device is fixed to the ceiling or wall on the standard plate and left to run; there is no cable run and no containment work. Mains variants are used where the site prefers them, and wireless interconnection lets a group of units in one wing report together.

Q: Where does the alert actually go?

A: Wherever the operator wants it. Typical Algiers configurations send a short local deterrent tone in the room plus a silent alert to the front desk, the nursing station, the security desk or a facilities inbox, delivered by app push, SMS or email, with the event visible on the cloud dashboard. In patient areas and quiet zones the local indication is set to visual only. Every event carries a timestamp, a device identity and a site attribution, and the history can be exported.

Q: What about privacy - is there a camera or a microphone?

A: No. The standard configuration has no camera and no microphone; the device reads the air and reports an event, nothing else. That is a deliberate design decision, because a hotel privacy officer, a healthcare estates team or a school governing body will not approve a recording device in the rooms where these problems happen. The cloud platform records device status and event history, not audio or video.

Q: Which certificates and documents come with the shipment?

A: CE marking with the EMC and radio equipment directives, RoHS and REACH material files, FCC certification for the US, UL and ETL listing paths where the authority requires them, CSA for Canada, UKCA for Great Britain, EN 14604 for smoke alarm devices, the EN 54 series for detection and radio-linked components, EN 50291 and EN 50194 for the CO and gas channels, NFPA 72, BS 5839, AS 1670 and AS 1851 documentation, RCM, EAC, GOST, KC, PSE, CCCF and the national market marks as required, plus ISO 9001 and ISO 14001 factory certification and NIST-traceable calibration records per lot. Manuals ship in English, Arabic, Russian, Spanish, French, Portuguese, Indonesian, Urdu, Hindi, Vietnamese and Thai, and battery transport documentation is included for air and sea.

Q: What are the lead times, minimum order quantities and warranty terms?

A: Sample cartons typically ship within 10-15 days by air and production project batches 25-32 days after approval. OEM and private-label programmes start from low four-figure unit quantities per model, and container-level mixed-model orders are quoted per destination. The detection line and the WANLIN device family carry a 3-year limited warranty (2-year on instrumentation and on the tester body), a 12-month warranty on battery packs, 30-day DOA replacement, and a five-year spare-parts window with a documented obsolescence path for tenders that require a long service-life commitment in Algeria.

Q: We are a distributor or a trading company - how does the territory work?

A: Talk to the export desk directly. We appoint distributors and importers by territory and by channel, we do not appoint competing distributors in the same territory without discussion, and we support the appointed partner with pricing, documentation, spares allocation, training and marketing collateral. Sourcing agents and trading companies are supplied on the same terms with neutral packaging where the end buyer should not see the factory name. Wanlin is actively recruiting local partners for 2026-2027.

Contact Wanlin: Start Your Smoking and Vape Detection Programme

For wholesale pricing, sample carton requests, room surveys and device schedules, CE, RoHS, REACH, FCC and EN documentation, OEM and private-label customization, spares and consumables programs, and partnership and territory discussions in Algiers and Algeria:

• Email: wanlinfirecontrol@163.com
• Export Hotline: +8613261677119
• Website: www.wanlinfire.com
• Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
• Markets: Europe, North America, the Middle East, Asia, Africa, Latin America and the Pacific - 24-hour response
• Global partner recruitment: distributors, importers, fire safety and building products wholesalers, hotel and healthcare suppliers, electrical contractors, system integrators, trading companies and sourcing agents welcome - exclusive-territory and OEM/ODM programs open for 2026-2027